Robin America EH30 Specifiche Scaricare il pdf (Pagina 26)

(7)

Reassemble parts in reverse order

disassembly. (See Fig. 23.)

Screw

*****

pce.

TIGHTENING

TORQUE

295

390

kgf

N*cm

IN-LB

This ,is the end of the disassembly and

reassembly procedures.

Test the reassembled recoil starter by the

following checking procedures in the next

section.

Fig.

CHECKING PROCEDURES AFTER REASSEMBLY

(1)

Pull starting knob

times, and pull out starter rope a little.

a) If starting knob

felt heavy to pull

cannot be pulled, check whether all the

parts

are

If ratchet does not function, check whether spring is hooked properly.

starter rope remains left in reel or starter rope does not return at all, immoderate strain

is imposed on the

spring.

rewind starter rope

times as per instruction in

Fig.

22.

If'

return power of

starter

rope is weak

starter rope cannot be fully rewind, inject a few

drops

mobile oil to the frictional portions.

it does not recover yet, wind the rope 1

times.

(In

this

case, refer to the instructions explained

paragraph a) above and confirm whether

or not immoderate strain is imposed on spring.)

If a sound is heard that spring is falling off, and starter rope does not return, reassemble

once again from the biginning.

installed correctly.

(2) Pull starting knob, and pull out starter rope all the way long.

(3)

Push the washer

washer

loose, retighten the bolts.

4-4

HOW

TROUBLES

(1)

CASE THE

SPRING

JUMPS

OUT

AT DISASSEMBLING.

Remove starter knob

from

rope.

Remove reel from starter case.

Hook outer end of spring

the reel. (See Fig.

26.)

Wind spring into the reel.

After winding

turns, tape spring

the reel

prevent the spring from jumping

out.

Prass outer end

spring

thumb

spiral spring jumps out

from

reel.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Commenti su questo manuale

Nessun commento

Robin America EH30 Specifiche Pagina 26

Commenti su questo manuale

Prodotti e manuali riguardandi Motore Robin America EH30